『スペロセイキ』のTOPページへ
What's New products Corporate Info Contact us Estimate
Air Slide Conveyor   
When blow the air into the powder, the powder is fluidized and behave like a liquid. Air Slide is using this phenomena and the powder flow down with gravity from the upper stream to the down stream in the Closed Air Slide or on the Open Air Slide, which has 7 ? 15 Deg. Inclination.   
Powder type suitable for Air Slide
Cement, Fly Ash, Fine Coal Powder, Collected Dust, Calcium Carbonate, Soda Ash, Iron Stone Powder, Silicate Pigment and others not listed below   
Powder type unsuitable for Air Slide
Bigger Grain Size Powder
Sticky Powder and Porous Powder
A powder shall not be rotted
  
Closed Air Slide   
Conveyance of Powder ----------------
Less Quantity and low pressurized air ( 600 - 800 mmAq ) generated by Turbo Blower is sent to the Air Chamber of the Air Slide through the Air Inlet. The air go through the canvas and enter into the powder as both ends of the Air Chamber is sealed up. The Powder loose the coagulation and then flow down to the down stream with the gravity.   
Structure ----------------------------
The porous canvas is put between the upper case and the lower case made of the steel plate, which is tightened by the bolt. It is maintenance free since there is no moving parts used. There is no limitation for the powder conveyance distance as far as the inclination of the Air Slide can be maintained and secured.   
Open Air Slide   
Discharging of Powder ----------------
The Open Air Slide is installed under the bottom of the Hopper with inclination of 7 Deg - 15 Deg. Less Quantity and low pressurized air ( 1500 ? 2500 mmAq ) is blown via the air inlet to the powder on the canvas. Then the powder is fluidized and start to moving down with the gravity to the discharge mouth of the Hopper.   
Structure ----------------------------
The porous canvas is put between the upper case and the lower case made of the steel plate, which is tightened by the bolt. It is a maintenance free since there is no moving parts used.   


■■■Supero Seiki Co., Ltd.
Ishihara-Machi 189, Kokura Minaki-Ku,
Kitakyushu-Shi, Fukuoka, 803-0185, Japan
Phone (81)-93-451-0390  FAX (81)-93-452-3549


●Casting Products ●Steel Plate Products Gears
●Bulk /Powder Handling Systems and Equipments
■Corporate Information
New Information    ■Contanct us    ■Estimate   
>> Japanese
お知らせ
製品情報
鋳造製品
ゴムライニング製バタフライ弁
海洋生物付着防止用バタフライ弁
ハウジング形管継手用バタフライバルブ
メタルタッチ式高温高圧バタフライ弁
ナイフゲートバルブ
製缶製品
操作機
偏芯型高密閉バタフライダンパー
スライドゲート
バタフライダンパー
粉体輸送装置・機器
エアスライドコンベアー
貯蔵サイロ・エアレーションシステム
粉体船積設備
粉体輸送専用船・エンジニアリング
会社概要
概要
沿革と概況
お問合せ
お見積り
『スペロセイキ』のTOPページへ